KARLA

KARLA

The most acomplished model from DAVIS. The resuly of the long work in the lab.

THE LAB WORDS

The KARLA speaker is using the most sophisticated drivers from DAVIS.To reach those very low frequencies, our laboratory has decided to use the PUSH-PULL charge with 2 carbon woofers. For the midrange frequencies, DAVIS has modified the 20 TK8 to get a very linear driver, from 40 to 5 000 Hz. The tweeter of the KARLA is really specific for this model, not only it has a very linear curve of sensitivity, but also it goes until 45 000 Hz in the axis. The main advantage of this tweeter is that we have used the same material (Kevlar) for the midrange and for the tweeter, also those 2 drivers are using the same geometry (cones in both case). When you listen to the KARLA, you really have the feeling that it is a same and unic driver for mid and high frequencies. A must!

PHILOSOPHY OF THE PRODUCT

THE KARLA speaker is the flagship of DAVIS. The main caracteristic is the huge frequency response of this model, which permits to feel the impact of very low frequencies, while listening to the very accurate details of all the hight frequencies

TYPE :
Nominal power :
Max power :
Number of ways :
Number of drivers :
Sensitivity :
frequency response :
Tweeter :
Midrange :
Woofer :
Dimensions (cm) :
Weight (kg) :
Impedance :
Frequencies cut off :

PUSH-PULL system with port at the back – Port for the midrange at the back too.
200 W
300 W
3
4
93 dB
25 – 35 000 Hz
cone tweeter in kevlar / voice coil 20 mm
kevlar 21 cm 8″ – voice coil 37 mm – Ticonal magnet
2 x 8 inch carbon fiber drivers
1.50 m (height) – 0.35 m (large) and 0.60 m (depth)
160 Kgs pièce
4 ohms mini
90/4000 Hz

Discover the range