Choice of electronics and advice of use:
Once again, when the work was done upstream (crossover + drivers), the association is only easier. This Courbet N ° 4 can be associated with any type of electronics. It is this choice that will determine the character you want given to the final listening (soft, warm, dynamic …). Let yourself be guided by the advice of your Courbet dealer.
The lowest resistance value is 4 ohms (this is very often the case for current speakers). Also, if your amplifier allows it, we recommend the 4 ohm setting on your amplifier. Otherwise, the columns are plugged into all current amplifiers on the market.
A multi-strand cable (not supplied) made of high-purity copper is highly recommended for the amp / speaker connection. Here too, ask your dealer for advice.
The speakers should be positioned symmetrically with respect to the listening area. A distance of at least 30 cm from the walls (rear and side) is recommended.
Finally, a set of 4 decoupling spikes is provided for each speaker. You can use them to decouple the speaker from the floor and thus get a more tense bass.